Foundries Iumex

In IUMEX GROUP S.P.A. high quality castings are produced according to national and international regulations. Quality control is managed at various levels of the production cycle, starting with a careful selection of incoming raw materials, and then continuing through all the other production phases. Laboratory tests are constantly carried out for further metallurgical control, chemical analyzes, metalloscopic and metallographic analyzes. We can meet any specific need, as we have modern equipment that can develop and produce any model for any specific product.

  • Mechanical Jets Division

    We have the following casting facilities:

    • Fusorio Department

        :

      • – 2 hot wind cubes, with a daily production of 100-130 tons of liquid cast iron
      • – 2 electric induction ovens, for homogenization, analytical control and possible corrections.
    • Forming plants
        :

      • – Automatic system “DISAMATIC – Tipo 2013” Dim. staffe: 600×460 mm.
      • – Automatic system “DISAMATIC – Tipo 2032” Dim. staffe: 775×600 mm.
      • – Automatic system F40 Dim. staffe: 1400×1200 mm. – 800×800 mm. – 800×1000 mm.
      • – Automatic system FOROMAT F10 Dim. staffe: 400×300 mm.
      • – Automatic system FOROMAT F20 Dim. staffe: 600×400 mm.
      • – Automatic system FOROMAT F30 Dim. staffe: 500×500 mm. – 600×600 mm.
      • – Forming by hand. (Possibility of making large items)
    • Sandblasting systems
        :

      • – 2 cluster sandblasters
    • Core shooter

        :

      • – system “COLD BOX”
      • – “SHELL MOULDING” system: schalco U900, schalco U180, lampe L 20
  • Spheroidal Cast Iron Production

    We have the following fusion facilities:

    • Ovens
        :

      • – 3 Induction electric ovens, with a capacity of 4 tons each.
      • – 2 Electric arc furnaces, with a capacity of 4 tons each.
    • Brackets and Forming Plant
        :

      • – GEORG FISCHER Forming Plant (SWITZERLAND). Frame dimensions: 800×600 mm. height: 240 mm. N 50 shapes / hour.
      • – ST Forming Plant (POLAND) Frame Size: 1.200×800 mm. height: 300 mm. No. 12 forms / hour.
    • Produzione Anime
        (sia formatura automatica sia manuale)

      • – Tecnologia a GAS (CT).
      • – Tecnologia COLD BOX (con resina BETASET).
  • Quality check

    The quality control of our fusion products is carried out using the following tools:

     

    • – Microscope Leitz mm. 5 a
    • – Durometer Wolpert 2 R c
    • – Quantometer spectrolab S.